Snatch Block Winch Pulley. 12 Tonne

12 Tonne (12,000kg) MBL - Snatch Block by WINCHMAX
Safe working load 8t

Using a snatch block will double the pulling power of your winch, reducing current draw and loading on your winch motor, bearings and gearbox.

Features

• An essential tool for use with your quad/ATV/Argo winch.
• Orange powder-coated finish, won't get left behind.
• 260mm Long x 130mm Wide x 65mm diameter hole.
• For use with up to 14.5mm cable diameter.
• Weighing in at over 3KG this is a heavy-duty product.
• Superb quality with grease nipple fitted on the spindle
• Swing out plates pivot at pulley shaft for easy engagement/disengagement from winch cable.

Click here to go to our 4 tonne snatch block

Using a Snatch Block

• A snatch block lets you either increase pulling power / reduce the load on your winch or change the direction of pull.
• Choose a snatch block with an MBL (Minimum Breaking Load) of at least twice your winch’s capacity and with a pully that fits your rope diameter.
• Open the side plates and place the pulley over the anchor shackle or tree saver shackle.
• Run the winch cable through the pulley groove, close the plates, and lock them.
• To double pulling power, hook the rope end back to a secure recovery point on your vehicle, creating a 2:1 mechanical advantage.
• To redirect pull, simply lead the rope from the winch through the block and on to the load without re-hooking—this changes the angle but not the pull ratio.
• Always keep the cable aligned in the centre of the pulley groove to prevent side loading.

Industry-leading lifetime warranty on mechanical components & 3yrs warranty on electrical.
VAT invoice provided with every sale.