






-
Espaçadores de roda de 30 mm para Land Rover Discovery MK3/MK4, Range Rover MK3/MK4 BLK T3
Espaçadores de roda genuínos WINCHMAX em alumínio de 30 mm (conjunto de 4)
Características- Design com anel de centralização do cubo para uma montagem fácil e maior estabilidade.
- Engenharia de precisão utilizando as mais recentes máquinas de fresagem CNC, garantindo um ajuste e acabamento perfeitos.
- Fabricados em alumínio 6061T6 de qualidade aeronáutica, para o mínimo peso e máxima resistência.
- Belo acabamento anodizado para maior resistência à corrosão e durabilidade.
- Especificação de parafusos de roda de alta resistência à tração (classe 10.9), significativamente superior à classe padrão das peças OE da Land Rover.
- Aumenta a distância entre eixos em 60 mm para uma melhor manobrabilidade e estabilidade.
- Permite a montagem de jantes e pneus mais largos.
- Compatível com todos os Discovery MK3/MK4 e Range Rover MK3/MK4 com cubos padrão.
- Diâmetro do círculo de fixação (PCD): 5 x 120 Rosca: 14 x 1,5 mm Orifício central: 72,6 mm
Garantia vitalícia líder do setor em componentes mecânicos e 3 anos em componentes elétricos.
Fatura com IVA fornecida em cada venda. -
Documentos PDF
-
WINCHMAX wheel spacers are precision made and will offer you many years of use if fitted and used correctly. Fitting must be undertaken by a suitably competent person in accordance with the vehicle manufacturers handbook and the guidance below. We recommend engaging the services of a professional wheel/tyre specialist.
- Remove wheel in accordance with vehicle handbook.
- Clean the contact surfaces of the rim and the hub (emery cloth/wire brush) to ensure they are free from corrosion and any dirt or grit - check the spacer fits snugly on the hub.
- Secure spacer to the hub using the lug nuts supplied with the spacers. Tighten (crosswise pattern) to the same torque setting specified by the vehicle manufacturer for the wheel fitting.
- Check that the recesses in the rear of the rim will accommodate the stud protrusion from the spacer.
- Re-fit the wheel onto the spacer in accordance with the vehicle handbook.
- Check for security and adequate clearance between the wheel and the vehicle throughout the full steering range 'lock to lock'.
- Re-check torque settings after 20 then 100 miles of driving and as required thereafter.
- If using blind lug nuts please ensure that they tighten correctly against the rim and do not bottom out against the end of the stud.
