






-
Espaçadores de roda de 20 mm compatíveis com Focus MK2, MK3, RS, ST. Volvo V40. T4 VERMELHO
Espaçadores de roda genuínos WINCHMAX em alumínio de 20 mm (conjunto de 4)
Características- Design com anel de centralização no cubo para uma montagem fácil e maior estabilidade.
- Engenharia de precisão utilizando as mais modernas máquinas de fresagem CNC, garantindo um ajuste e acabamento perfeitos.
- Fabricados em alumínio 6061T6 de qualidade aeronáutica, para um peso reduzido e máxima resistência.
- Belo acabamento anodizado para maior resistência à corrosão e durabilidade.
- Especificação de parafusos de roda de alta resistência à tração (classe 10.9), significativamente superior à das peças OE de classe padrão.
- Aumenta a distância entre eixos em 40 mm para melhorar a manobrabilidade e a estabilidade.
- Permite a montagem de jantes e pneus mais largos.
- Pode melhorar o raio de viragem.
- Compatível com Ford Kuga de todos os anos, Mondeo 2000-2007, Ford C-Max 2003, Transit Connect 2003-2013, Ford Focus MK2 MK3, RS, ST.
- Diâmetro do círculo de furação (PCD): 5 x 108; Rosca: 12 x 1,5 mm; Orifício central: 63,4 mm
Garantia vitalícia líder do setor para componentes mecânicos e 3 anos para componentes elétricos.
Fatura com IVA fornecida em cada venda. -
Documentos PDF
-
WINCHMAX wheel spacers are precision made and will offer you many years of use if fitted and used correctly. Fitting must be undertaken by a suitably competent person in accordance with the vehicle manufacturers handbook and the guidance below. We recommend engaging the services of a professional wheel/tyre specialist.
- Remove wheel in accordance with vehicle handbook.
- Clean the contact surfaces of the rim and the hub (emery cloth/wire brush) to ensure they are free from corrosion and any dirt or grit - check the spacer fits snugly on the hub.
- Secure spacer to the hub using the lug nuts supplied with the spacers. Tighten (crosswise pattern) to the same torque setting specified by the vehicle manufacturer for the wheel fitting.
- Check that the recesses in the rear of the rim will accommodate the stud protrusion from the spacer.
- Re-fit the wheel onto the spacer in accordance with the vehicle handbook.
- Check for security and adequate clearance between the wheel and the vehicle throughout the full steering range 'lock to lock'.
- Re-check torque settings after 20 then 100 miles of driving and as required thereafter.
- If using blind lug nuts please ensure that they tighten correctly against the rim and do not bottom out against the end of the stud.
