Gå til produktoplysninger
1 af 2

Sæt monteringsbolte til 13.500 lb spil

Sæt monteringsbolte til 13.500 lb spil

Hurtig kode: 1259
SKU: WMSP1259
Normalpris £23.95Inc VAT£19.96Exc VAT
Normalpris Inc VAT £0.00Exc VAT
Udsalgspris £23.95Inc VAT£19.96Exc VAT
Udsalg Udsolgt

Brug for hjælp?

Ring til os på +44 (0) 1986 899264, så hjælper vi dig gerne.

Overensstemmelsescertifikat på alle produkter
Order within
Days
:
h
:
m
:
s
for UK Next Working Day delivery on
Se komplette oplysninger
  • De medfølgende bolte har den korrekte længde til montering af en 13500lb WINCHMAX-trækspole på en 5-7mm plade. Andre tykkelser kan kræve bolte af andre længder. De nødvendige kriterier er, at boltene er af mindst styrkeklasse 8.8, gevindlængden skal være tilstrækkelig lang til at omslutte firkantmøtrikken fuldt ud, men må ikke stikke så langt ud, at bolten rører toppen af møtrikhuset i trækspolens stel.

    Læs venligst vejledningen til brug af monteringsbolte under fanen 'specifikationer'.

    Monteringsboldsættet til 13500-trækspolen består af:

    4 x M10x30 8.8 styrkeklasse sekskantbolte
    4 x M10 firkantmøtrikker (15.8mm x15.8mm x 8.3mm)
    4 x M10 fladskiver (2.0mm tykke)
    4 x M10 fjederskiver (2.8mm tykke)
    2 x M12x25 8.8 styrkeklasse sekskantbolte
    2 x M12 8.8 styrkeklasse sekskantmøtrikker
    2 x M12 fladskiver (2.0mm tykke)
    2 x M12 fjederskiver (3.3mm tykke)

  • Winchmax winch, mounting plate and fairlead diagram
    • Install a suitable mounting bumper or mounting plate in the required position. The winch must be mounted with the direction of pull perpendicular to the mounting bolt fixings. The plate should be fabricated from minimum 6mm steel.
    • Attach fairlead (roller type for wire rope or aluminium hawse for synthetic rope) to the mounting plate using two hex nuts (9) & bolts (1) with flat (7) and spring (8) washers.
    • Insert the four square nuts (2) into the pockets at the base of the winch frame.
    • Thread the four high tensile bolts (5) with flat (3) and spring (4) washers up through the mounting plate and into the square nuts in the winch. Tighten the mounting bolts to a torque setting of 60Nm.
    • The supplied bolts are the correct length for installation on a 5-7mm plate. Other thickness’s may require bolts of a different length. The required criteria are that the bolts are at least 8.8 grade high tensile, the thread length should be sufficiently long to fully engage the square nut but must not protrude to the extent that the bolt contacts the top of the nut housing in the winch frame.
    Winchmax. Mounting bolt close up placement
    • The mounting bolt must only be used with the correct square nut designed to seat into the nut pockets formed in each corner of the motor and gearbox base. Never use standard hexagonal type nuts.
    • When selecting a bolt length the thread must be long enough to pass through the mounting material and fully fill the thread of the square nut without contacting the top of the mounting bolt pocket.
    • The supplied flat washer and split lock washer should always be used.
    • The minimum mounting bolt thread length = the thickness of the mounting material plus 24mm The maximum mounting bolt thread length = the thickness of the mounting material plus 29.5mm
    • If you need to increase the clearance in the nut pocket, addition washers can be used but we do not recommend an increment of more than 4mm.
    • Failing to correctly mount your winch could result in a catastrophic structural failure to the winch and serious consequential damage/injury.

Relaterede produkter